LiveWire Studio

Preparing your studio…

Your motorcycle

Harley-Davidson LiveWire

Orange Fuse / black · 0 accessories

Accessories

21 options

Fit evidenceSaved research leads (0)Keep my charging-cable tray

Search Amazon ↗Search makers ↗

More possibilities

5 source-linked leads

Harley-Davidson

H-D LiveWire frame protectors

Harley lists 2020+ LiveWire

Model-specific protection lead; installation uses adhesive-backed pads. It does not replace a skid plate or establish crash protection.

Reviewed 2026-10-01

Part 49000168 · pair of elastomer frame pads for stationary tip-overs. Exterior dimensions have not been established.

View source

SW-Motech · via AoZ

SW-Motech PRO Daypack

Requires tank mount + PRO ring

Use the ELW-compatible AoZ dual-purpose tank mount and matching PRO ring, both separate. Check handlebar sweep, rider space and charge-door access.

Reviewed 2026-10-01

5–8 L tank bag. Published exterior size is a bag dimension, not a measurement of the bike or its installed clearance.

290 × 225 × 125 mm · 11.4 × 8.9 × 4.9 in · published bag size (B)

View source

SW-Motech · via AoZ

SW-Motech PRO Micro WP · 4 L

Requires AoZ dual-purpose tank mount

Bundle includes the bag and PRO ring; the LW1 tank mount is separate. Confirm original ELW setup and charging-door/steering clearance.

Reviewed 2026-10-01

Waterproof tank-bag bundle with PRO ring. No complete exterior dimensions verified in this review.

View source

SW-Motech · via AoZ

SW-Motech PRO Yukon WP · 6 L

Requires AoZ dual-purpose tank mount

LW1 tank mount is sold separately. Compare installed height and full handlebar sweep; verify access to the charge door.

Reviewed 2026-10-01

Waterproof tank-bag bundle with PRO ring. Capacity alone cannot establish its size or fit.

View source

Adventures on Zero

AoZ 12 V accessory cable

ONE listed · confirm original ELW

Listing names ONE and S2 Del Mar, not explicitly the original 2020 ELW. Ask the maker to confirm connector, pinout and accessory power requirements.

Reviewed 2026-10-01

P&A-port power lead with SAE connector for accessories. Cable routing and available electrical capacity require verification.

View source

3D placement studies

Luggage configuration

Givi DLM30 rear case

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

Universal case · fabricated ELW structure

Published case size · custom mount

Luggage configuration

S2 Street Rack donor

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

S2 product · adapted to fabricated rails

Concept mount · fit unverified

Luggage configuration

Urban ABS top case

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

Published 405 × 360 × 215 mm envelope

Published case size · custom mount

Luggage configuration

DUSC L top case

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

Published 486 × 413 × 295 mm envelope

Published case size · custom mount

Luggage configuration

Caddy-retaining side study

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

Custom load path · E22N envelopes

Concept mount · fit unverified

Luggage configuration

Caddy-retaining touring

Fit still needs verification

Case or donor carrier needs a verified ELW adapter. Existing rear guide positions are unverified.

Source needs a fresh fit check

Geometry details

Custom load path · Givi envelopes

Concept mount · fit unverified

Adventures on Zero

AoZ EVO fog-light kit

Maker lists HD LiveWire · modification required

71 mm lamps. Requires a separate P&A accessory cable and model-specific mounting work; the included steel mount is described for S2 models. Use the P&A port, not a direct battery connection.

Checked 2026-09-28

Geometry details

Published 71 × 71 mm lamp faces. Connected radiator-side mounting study based on AoZ’s original LiveWire photos; body depth, spacers and hidden hardware remain unverified. The included S2 mount is not an ELW mount.

Partial published dimensionsCheck maker ↗

Adventures on Zero

AoZ 1-inch bar risers

Maker lists HD LiveWire

1 in rise published. Stock bar and screen hardware used; full footprint remains unmeasured.

Checked 2026-09-28

Geometry details

Saddles follow the central bar section and clamp spacing in the mesh. The 25.4 mm rise is published; saddle size, vertical lift direction and stock-clamp preview are inferred. Bars, controls and rider grips rise together only at the default pose. Cable slack and steering clearance are unverified.

Partial published dimensionsCheck maker ↗

Adventures on Zero

AoZ LiveWire skid plate

Maker lists HD & LiveWire

Skid plate and mounting hardware included. Crash bars and bolt guards excluded; pan dimensions and real clearances remain unmeasured.

Checked 2026-10-01

Geometry details

Photo-informed folded pan · Grade C. Overall size, 4 mm thickness, slots and mounting pose are estimates. Hidden hardware and real clearances are unverified; crash bars and bolt guards are not included.

Photo-informed pan · all dimensions estimatedCheck maker ↗

Adventures on Zero

AoZ highway peg brackets

Requires AoZ skid plate · confirm ELW

Uses passenger footpegs with AoZ skid plate or a separately engineered mount. Current listing names ONE; confirm original 2020 ELW applicability with the maker.

Checked 2026-09-28

Geometry details

Left and right bracket envelopes sit outside the forward pan walls, not across the motor. They require the skid plate; peg hardware, bolt pattern and all dimensions remain unverified.

Reference envelope · model neededCheck maker ↗

Adventures on Zero

AoZ windscreen mount

ONE listed · confirm original ELW

Mount only; buy a compatible Pan America windscreen separately. Listing does not explicitly establish original ELW fit or steering clearance.

Checked 2026-09-28

Geometry details

Thin mount envelope above the light cowl, leaning back toward the display as in the maker photo. Screen not included; hidden fixing holes and original ELW compatibility require confirmation.

Reference envelope · model neededCheck maker ↗

Adventures on Zero

AoZ dual-purpose tank mount

Maker lists HD ELW

Needs a Quad Lock phone setup or compatible SW-Motech tank ring/bag. Does not establish charging-door clearance for every bag.

Checked 2026-09-28

Geometry details

Adhesive-base study follows the rear tank spine behind the charge lid. Its inferred footprint and tilt do not prove adhesive contact, lid opening or bag clearance.

Reference envelope · model neededCheck maker ↗

Adventures on Zero

AoZ Tail Tidy v4

ONE listed · tray modification possible

V4 lists stock and Corbin seats. Wiring layout may require drilling the EVSE caddy; confirm original ELW fit and a reversible installation.

Checked 2026-09-28

Geometry details

Tail/plate envelope below the rear seat, with its upper end toward the under-tray region. Existing stock tail geometry is retained. Mount, wiring, tire travel and seat motion are unverified.

Reference envelope · model neededCheck maker ↗

Harley-Davidson

H-D carbon speed screen blade

Harley lists 2020+ LiveWire

57400400 attaches to the original speed screen. Product contour remains an envelope.

Checked 2026-09-28

Geometry details

Thin overlay follows the upper cowl slope rather than floating ahead of the headlight. Envelope and attachment remain Grade C; source stock geometry is retained.

Reference envelope · model neededCheck maker ↗

Harley-Davidson

H-D LiveWire charge door

Fit still needs verification

Existing source-linked study; inspect its exact bike applicability and mounting requirements.

Source needs a fresh fit check

Geometry details

Envelope centered on the source charge-door rim instead of inside the tank. Size is inferred from the bike mesh; the OEM replacement contour and hinge remain unverified.

Reference envelope · model neededCheck maker ↗

Harley-Davidson

H-D LiveWire front axle covers

ONE listed · confirm original ELW

43000307 is a front axle-cover product. The current ONE listing does not verify the original ELW or a rear cover.

Checked 2026-09-28

Geometry details

Two separate front-axle cover studies share the mesh axle axis. The linked product is front-only. Cover diameter, depth and fastening are inferred; original ELW fit still needs maker confirmation.

Reference envelope · model neededCheck maker ↗